Shintsha umbala wangemuva: i-AutoCAD noma i-Microstation

Ngokuvamile sisebenzisa umbala ongemuva omhlophe noma omnyama, ukukushintsha kungumsebenzi ojwayelekile wezizathu zokubona. Kulesi sibonelo sizobona ukuthi kwenziwa kanjani nge-AutoCAD ne-Microstation.

Nge-AutoCAD ngaphambi kwe-2008

Kufeziwe Amathuluzi> Izinketho, uma unesidlangalaleni se-Civil 3D noma isicelo esingabonisi imenyu ngenhla, ungayithayipha umyalo ngesandla Izinketho, khona-ke faka.

Kuthebhu Khombisa inkinobho ishintshiwe Colors. Lapho ungakhetha umbala wemodeli, Ukuhlelwa, ukukhethwa, Njll

Iwusizo kakhulu i-visualizer yangaphambilini onayo, ukuthi udinga i-Microstation nezinye izinketho zombala.

Nge-AutoCAD ngemuva kwe-2009

Nge Ribbon I-AutoCAD 2009 kanye ne-2010, bona ukuthi kunezindawo zokuthola imiyalo. Kubhalwe igama elithi Izinketho kuphela, futhi lisitshela ukuthi likuliphi imenyu, okunye kuyafana.

Nge-Microstation

Uma kwenzeka i-Microstation, yenziwa nge:

• Indawo yokusebenza> Okuncamelayo
• Lapho sikhetha inketho kusuka kuphaneli lesokunxele Izinketho zokubuka
• Uma kungakhethiwe Isendlalelo esimnyama -> Mhlophe, sizoba nesizinda esimnyama, okuyiyona ezenzakalelayo. Ngaphandle kwalokho kuzoba mhlophe.
• Ungaphinda ukhethe ukuthi akumhlophe, okubonisa ukuthi i-pate engezansi iboniswe kumcibisholo, kokubili umbala womodeli osebenzayo futhi Ukuhlelwa (Imodeli yeshidi).

Lezi zici zisebenza ngokujwayelekile endaweni yokusebenza, kepha kuzici zokubuka ungakhetha ukuthi sifuna ukuthi okuzenzakalelayo (okumnyama) kugcinwe noma umbala ochaziwe usetshenziswe. Okokugcina kusebenza kufayela lomsebenzi, uma ufuna ukukhiqiza, kufanele ukwenze kufayela lembewu (ifayela lembewu).

Ukuze wenze lokhu, chofoza ekhoneni le- Buka, futhi ukhetha Buka izimfanelo, bese ukhetha Isizinda.

Lesi sibonelo senziwa nge-Microstation V8i, enezinguqulo ngaphambi kwe-XM kuphela ezobona amabhokisi okukhetha (Hlola uhlu)